EXPLORE SOME OF OUR PROducTS

Today, we can be proud of the fact that our company has become a specialist in manufacturing and exporting high-quality rubber products, tailored to our client's specific requirements, drawings and samples. Our commitment to superior product quality has enabled us to make a strong impact on the international market, and this is an accomplishment that we take great delight in.

O RING

DIAPHRAGM

RUBBER LEAK STOPPER

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface.

Oil seals are used to protect shafts and bearings from ingress of dirt and foreign matter and egress of oil or grease. An oil seal generally consists of an outer circular metal part and an inner flexible member that does the actual sealing and is bonded to the metal part by chemical adhesive agents.

A rubber diaphragm is a flexible membrane that's usually circular in shape and anchored around the edges. The main function of a diaphragm is to act as a seal between two chambers. Rubber diaphragms come in a huge variety of shapes and sizes, as well as custom moulded diaphragm configurations.

Leak Stoppers Threaded cone for use as a bung in the event of a hole in the boat tube Standard item for liferaft emergency packs High quality moulded rubber.

OIL SEALS

A rubber washer is a ring made of rubber used in mechanical devices. It is used to prevent vibration from spreading from one part to another, reducing the noise levels. Typical uses are mounting computer parts, like fans and hard disk drives.

U Cup seals, as their name implies, have a U-shaped profile, including an outside static sealing lip and an inside dynamic sealing lip. U-Cups, or U-Seals are used for both dynamic and static applications. The “U” shape energizes the sealing lips as the application pressure increases.

Extruded rubber products are lightweight, flexible, extremely durable and long-lasting. Extruded rubber parts are ideal for use in myriad harsh or extreme conditions, such as high temperature environments or applications with significant chemical exposure.

These are tubes, or edging, used to cover the rough and sharp edges of a panel hole. Rubber grommets grip wires and cables that pass through the hole, keeping them secure while protecting them from abrasions, cuts and snags.

RUBBER WASHER

GROMMETS

EXTRUSION PRODUCTS

U SEALS

These Rubber Tiffin Gaskets are made of premium grade material and is used for commercial purposes. Features: • Leak-resistant. • Food-grade material. • Easy cleaning.

A Rubber Sleeve is a basic type of coupling. This consists of a pipe whose bore is finished to the required tolerance based on the shaft size. Rubber Sleeves and buffers can be manufactured in a range of shapes, sizes and material to suit the application.

Extruded rubber products differ from molded rubber products based on how they’re made. Extruded parts are forced through a die of the required cross section under pressure of an extruder.

Rubber-to-metal bonded assemblies consist of an elastomer that is molded and chemically bonded to a clean metal surface using a specialized adhesive. During the injection, transfer, or compression molding process, rubber vulcanization and adhesive curing occur at the same time

TIFFIN RUBBER GASKETS

RUBBER SLEEVES

METAL RUBBER BONDED PARTS

EXTRUDED RUBBER STRIPS

Rubber buffers, also called rubber-metal buffers, vibration dampers or rubber dampers, are suitable as elastic support for machine units such as motors, compressors or pumps, or for setting up devices. As impact buffers, they are often used as end-stop buffers and absorb most of the kinetic energy generated on impact.

Automobile rubber products or auto rubber parts are used extensively in the automotive sector. The Rubber Industry as a whole is facing major challenges and change to meet the changing demands of auto industry in meeting material specifications, performance, durability and reliability requirements.

A gasket, also known as an O-ring or washer, seals the gap between two surfaces. In most cases, these items are made of rubber and are available in a variety of sizes and shapes depending on their purpose.

Suspension bushes are a type of vibration isolator that is often made of rubber. The purpose of a suspension bush is to prevent metal-to-metal contact while still allowing for some movement. The movement is essential for allowing parts of the suspension to move freely.

RUBBER BUFFERS

GASKETS

SUSPENSION BUSH

AUTOMOBILE RUBBER PARTS

A mud flap is typically made from a flexible material such as rubber that is not easily damaged by contact with flying debris, the tire, or the road surface. Mud flaps can be large rectangular sheets suspended behind the tires, or may be small molded lips below the rear of the vehicle's wheel wells.

PU Bushes that are made from quality polyurethane that is sturdy and does not melt even when exposed to high temperatures. These bushes have suitable water, oil, weather and cut resistance properties and also feature good dimensional stability as well as load properties.

These are used to protect some particular parts of the vehicle from dust. Rubber Bellows and Rubber Gaiters are also used to protect from dust, debris, weather conditions, etc. thus increasing the life of those parts & vehicle.

Suspension Boots are designed to eliminate heel pressure. The Original Heelift Suspension Boot is ideal for non-edematous legs or patients who prefer a slightly cooler boot.

PU BUSH

RUBBER DUST COVERS

SUSPENSION BOOTS

RUBBER MUD FLAPS

CENTER BEARING SUPPORT

GROMMET

RUBBER HANDLE GRIP

METAL RUBBER BOND GRIP

Center bearing supports carry the load of the drive shaft while allowing axial and radial deflection during start-up and braking. They offer the perfect isolation of structure-borne noise and vibration by damping resonance frequency and shaft tumbling.

A flexible loop that serves as a fastening, support, or reinforcement. : an eyelet of firm material to strengthen or protect an opening or to insulate or protect something passed through it.

Rubber handle grips are molded from high quality rubber to provide performance and durability superior to typical foam, vinyl, plastic and TPE handle grips.

Metal Rubber Bond grips are molded from high quality rubber to provide performance and durability superior to typical foam, vinyl, plastic and TPE handle grips. Rubber handle grips are the superior choice when it comes to performance and durability.

Metal Rubber Bond grips are molded from high quality rubber to provide performance and durability superior to typical foam, vinyl, plastic and TPE handle grips. Rubber handle grips are the superior choice when it comes to performance and durability.

Workout band handles for exercise: With these heavy-duty resistance bands take sets, you can do all kinds of resistance training at home, like strength building, Pilates, stretching, etc.

These Marker Lights are effective in getting the vehicle noticed from a distance which avoids accident and damage to the vehicle.

PU Rolls. We offer a wide range of PU Rolls manufactured using finest grade of raw material. Different PU Rolls have different grades of hardness and are used as per the requirements of the buyer.

METAL RUBBER BOND GRIP

PLASTIC RUBBER BOND GRIP

MARKER LAMP

PU RUBBER ROLL

A PVC or polyvinyl chloride ball valve is a plastic on and off valve that has a rotary ball with a bore where turning the ball a quarter turn can stop the flow of a fluid.

PLASTIC BALL VALVE

AIR RELEASE VALVE

Air Release Valves, or Air Relief Valve function to release air pockets that collect at each high point of a full pressured pipeline. An air release valve can open against internal pressure, because the internal lever mechanism multiplies the float force to be greater than the internal pressure.

PTFE COMPONENTS

Polytetrafluoroethylene (PTFE) is a fluoropolymer and is commonly known by its trade name, Teflon®. Unique properties of PTFE include nonreactivity, hydrophobicity, a low coefficient of friction, and good insulating properties.

PTFE GASKET

Virgin grade PTFE gaskets are made from 100% pure material which is used in most general applications. It is extremely soft and formable and is often used for chemical resistant seals and gaskets. It is made directly from the resin producer and has never been processed into a shape.

PP COMPONENTS

Polypropylene (PP) is a thermoplastic “addition polymer” made from the combination of propylene monomers. It is used in a variety of applications to include packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like living hinges, and textiles.

PLASTIC COMPONENTS

Plastics are a wide range of synthetic or semi-synthetic materials that use polymers as a main ingredient. Their plasticity makes it possible for plastics to be moulded, extruded or pressed into solid objects of various shapes.

FOLDED HOSE

Increase the life span of washing machine by avoiding the breakage of drum. Regularly descale the machine with Calidad descale powder. Descale powder eliminates the calcium deposits and detergent residue thoroughly and keeps your washing machine clean and efficient.

HOSE CONNECTOR

A hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel, brass, stainless steel, aluminium or plastic.

PLASTIC GEARS

INJECTION MOULDING

Injection moulding is a manufacturing process for producing parts by injecting molten material into a mould, or mold. Injection moulding can be performed with a host of materials mainly including metals, glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers.

AIR VALVE

Air valves are hydromechanical devices designed to automatically release air and wastewater gases or admit air during the filling, draining or operation of liquid piping systems for water and wastewater services.

Most plastic gears are made from nylon and acetal. But nylon absorbs moisture with resultant changes in properties and dimensions. Acetal copolymers provide long-term dimensional stability as well as high fatigue and chemical resistance over a wide temperature range.